滾壓復合機設備為自動調刀式，更換型材時，工作臺電動升降自動對準型材擠壓部位，托架高度無需調整，十分省事。上、下片刀可單獨調節高度，對于各種異型材包括一些兩側絕緣條不在同一水面擠壓的型

The rolling composite machine equipment is of automatic blade adjustment type. When replacing profiles, the worktable electric lifting automatically aligns with the extrusion part of the profile, and the bracket height does not need to be adjusted, which is very convenient. The height of the upper and lower blades can be adjusted separately for various profiles, including those with insulation strips on both sides that are not squeezed on the same water surface

材都很實用。那么關于滾壓復合機的另類工作方式以及注意事項你有了解多少呢?

The materials are all very practical. So how much do you know about the alternative working methods and precautions of the rolling composite machine?

滾壓復合機組工作方式:

Working mode of rolling composite unit:

采用3組硬質滾輪，對穿絕緣帶的鋁合金型材進行壓合。滾輪調整:每一個滾輪可以獨立調整(上下、左

Three sets of hard rollers are used to press the aluminum alloy profile with insulation tape. Roller adjustment: Each roller can be independently adjusted (up, down, left)

右)，并且通過數字顯示，第三個滾輪在滾輪調整時，可以調整，以保證隔熱型材的平行度和直度。本機采

Right), and through numerical display, the third roller can be adjusted during roller adjustment to ensure the parallelism and straightness of the insulation profile. Local procurement

用六組動力系統，六組擠刀均采用主驅動，保證型材擠壓時受力平衡，進料速度快，工作效率高。本設備

Six sets of power systems are used, and all six sets of extrusion knives are driven by the main drive, ensuring balanced force during profile extrusion, fast feeding speed, and high work efficiency. This device

適用于鋁材，鋁塑及各種斷橋鋁型材。

Suitable for aluminum, aluminum-plastic, and various bridge cut aluminum profiles.